how to develop own website

Solid surfacing has been around for over thirty years. Because of the obvious benefits for the home owner, it is a material that is here to stay. You can count on Countertops & Cabinets Inc. to keep on top of this expanding market, to insure your new solid surface countertop will give you a lifetime of beauty.
Solid Surfacing is now offered in a huge selection of colors. Countertops & Cabinets Inc. only uses the highest quality solid surfacing materials. Below you will find our edge profiles and flexibility of countertops we have done in he past. Countetops & Cabinets Inc. offers major brand name of solid surface material Dupont Corian,Staron,Formica Solid Surface, Hi-Macs,Avonite and Swanstone. Because of the its solid beauty and integral seams, solid surfacing provides ultimate flexibility. Layouts that would be impossible with other materials come to life with solid surface. Complex forms such as multiform or curved islands, peninsulas and work centers are easily created using solid surface. Unlike laminate, solid surfaces can have formed edges on all sides. This allows for natural designs with complementary edges to be achieved.The integral seams also allow for integrated solid surface sinks to be installed. From a style perspective, this provides a smooth and seamless transition to the bowl. From a practical standpoint, this provides superior durability and utility. All of these attributes make solid surface the ideal material for countertops. Your imagination becomes the only limit to the design flexibility and beauty of solid surface!

Mobirise

Because of the its solid beauty and integral seams, solid surfacing provides ultimate flexibility. Layouts that would be impossible with other materials come to life with solid surface. Complex forms such as multiform or curved islands, peninsulas and work centers are easily created using solid surface. Unlike laminate, solid surfaces can have formed edges on all sides. This allows for natural designs with complementary edges to be achieved..

The integral seams also allow for integrated solid surface sinks to be installed. From a style perspective, this provides a smooth and seamless transition to the bowl. From a practical standpoint, this provides superior durability and utility. All of these attributes make solid surface the ideal material for countertops. Your imagination becomes the only limit to the design flexibility and beauty of solid surface!

Mobirise

Solid surfaces are approved for a wide range of horizontal and vertical applications including kitchen countertops, bathroom vanities, sinks, table tops, furniture, lighting fixtures, bar tops, reception desks, and signage. Most solid surfaces, like those from Dupont™ come with a 10 year limited product warranty. 

One of the benefits of solid surfaces is that they are consider long lasting and can stand up to heavy use. For this reason, Solid surfaces have become popular in retail, food service, healthcare, education, lodging, and public and corporate spaces. Because the material is non-porous, it does not support the growth of bacteria, mold or mildew, and is easy to clean, especially considering there are no seams to trap the dirt.

The beauty of solid surface is it's a renewable surface. If you cut , scratch or burn your solid surface top it can be easily be repaired. See How! 


Solid surfaces are certified (NSF/ANSI 51) for contact with all food types.
Please check out the Pro/Cons of countertops on our 411 page

Edge Treatments

Undermounts Sinks

Stainless Steel Sinks
Mobirise

60/40

18Gauge

0utside Dimensions 20.625" x 32" x 18.5"

Bowl depth 9" & 7"

Reverse Available
**Stock

Mobirise

SIngle Bowl

18 Gauge

Outer Dimensions
17.73" x 23.05"

Bowl Depth 9"
**Stock

Mobirise

Double Bowl

18 Gauge

Outside Dimensions
18.25" x 32.625"

Bowl Depth 8.75"
**Stock

Mobirise

Large Single

18 Gauge

Outer Dimensions
31.625" x 18.375"

Bowl Depth 9"
**Stock

Mobirise

Small radius single bowl sink- Z002

16 Gauge
Outer Dimensions
32"x19"
Bowl Depth 10"
**Non Stock

Solid Surface Sinks

Mobirise

K-130

Overall Sink Dimensions:
32”L x 18.5”W x 9.125”D

Left Bowl Dimensions:
16.5”L x 14.25”W x 8”D

Right Bowl Dimensions:
16.5”L x 14.25”W x 8”D

Colors
White/Bisque

Mobirise

K-140

Overall Sink Dimensions:
32”L x 18.5”W x 9.125”D

Left Bowl Dimensions:
16.5”L x 17”W x 8”D

Right Bowl Dimensions:
16.5”L x 11.5”W x 8”D

Colors
White/Bisque

Mobirise

K-160

Overall Sink Dimensions:
22.5”L x 17.75”W x 9.375”D

Inside Sink Dimensions:
15.625”L x 20.375”W x 8.5”D

Colors
White/Bisque

Mobirise

V-130

Overall Sink Dimensions:
18.5”L x 12.25”W x 7-.25”D

Inside Sink Dimensions:
16.25”L x 12.25”W x 5.25”D

Colors
White/Bisque

Vanity Sink

Mobirise

V-140

Overall Sink Dimensions:
19.5”L x 14.25”W x 6.5”D

Inside Sink Dimensions:
18”L x 12.75”W x 5”D

Colors
White/Bisque

Vanity Sink

Granite Composite sinks
Mobirise

1-3/4 BOWL

Bowl Depths:
9-1/2'' & 8''
- Required outside cabinet: 33''
- Cutout Size:
32-1/4'' x 21-1/4''
- Cutout Corner Radius: 5/8''
- 80% solid granite
- Heat resistant up to 536°F

Mobirise

Super Single Bowl

- Bowl Depth:
9-1/2''
- Required outside cabinet: 36''
- Cutout Size: Please refer to the supplied cutout template.
- Cutout Corner Radius: 5/8''
- 80% solid granite
- Heat resistant up to 536°F

Mobirise

Equal Double Bowl

- Bowl Depths:
9-1/2'' & 9-1/2''
- Required outside cabinet: 33''
- Cutout Size:
32-1/4'' x 21-1/4''
- Cutout Corner Radius: 5/8''
- 80% solid granite
- Heat resistant up to 536°F

Mobirise

Link

For more granite composite sinks please visit the Blanco website

The Backsplash

This is where the countertop meets the wall. Its basic function is to protect the
wall from spills and splashes. Here at Countertops & Cabinets Inc. we offer two
styles of backsplashes.

Set on splash is where a 1/2" thick splash is set on top of the countertop and
where the splash and the top of the countertop meets there will be a silicone
sealer applied.

Cove backsplash is where a continuous piece of solid surface rolls from the
flat deck to the vertical splash. Ideally a coved splash should be your splash of
choice. It is by far the easiest to clean, and it gives you much better water
protection then a set on splash.
Please browse the pictures below to get an idea of what the back splash
options are.

Care Cleaning


Maintenance of your Solid Surface Countertops:
Finishes for Surface Countertops:
Here are four types of finishes that can be supplied on your Solid Surface by Countertops & Cabinets Inc.. The following simple definitions should assist with key items to consider when choosing a finish and necessary maintenance. 


Matte Countertops :
Recommended standard finish especially in high traffic areas with low or no sheen and normally requires the least maintenance.
Satin Countertops:
Slightly higher sheen that may require more attention depending on traffic and use.
Semi-gloss Countertops:
Higher sheen with some reflection requires special consumer instructions, not suggested for a high traffic or high use areas, may require a certified fabricator to maintain.
Gloss Countertops :
Recommended for vertical surface only, requires certified fabricator to maintain finish.
-Darker patterns may need more frequent attention to maintain a uniform finish. Over time with use and general cleaning the surface finish will appear to change. We recommend to periodically clean the entire surface following the guidelines for removing stubborn residue to restore or maintain the original finish.


General Cleaning of Solid Surface Countertops:
For day to day cleaning, warm soapy water or non-abrasive household cleaners such as glass cleaner, Fantastik®, Formula 409® or commercially available solid surface cleaners will remove most residues from your Wilsonart countertops. Then rinse and towel dry the surface to prevent spotting especially in areas with hard water. For a final touch, you may apply Protect All Shine Plus™ to your countertop for a clean, dry professional appearance.
Removing Stubborn Residue:
Stubborn residue that will not come out with day to day cleaning methods requires a slightly stronger cleaner. The following suggestions will assist you to remove stubborn residue and refurbish the finish.
Matte:
Apply an abrasive cleaner like Bon-ami®, Comet® or Ajax® and a damp sponge, buff in a circular motion. Then rinse and towel dry.
Satin:
Apply a mild abrasive cleaner such as Soft Scrub® and a damp sponge, rub in a circular motion. Then rinse and towel dry. If additional blending is necessary, lightly buff with a gray (7448) Scotch-Brite™ pad then rinse and towel dry.
Semi-Gloss:
Apply soapy water and with a white Scotch-Brite™ pad rub in a circular motion. Then rinse and towel dry.
Gloss Finish:
This finish is limited to mild detergents or nonabrasive cleaners with a soft cloth.
Removing Minor Cuts & Scratches: Wilsonart® Solid Surface is completely renewable since the color goes all the way through. The following guideline will assist with removing minor cuts and scratches. Apply an abrasive cleaner like Bon-ami®, Comet® or Ajax® and a damp green Scotch-Brite™ pad, rub in a circular motion. Rinse and begin blending in a circular motion in progress steps until achieving uniform finish.

Matte (blending):
With damp sponge and the same abrasive cleaner, buff in a circular motion. Rinse and towel dry.
Satin (blending):
Apply a mild abrasive cleaner such as Soft Scrub® and a damp sponge, buff in a circular motion. Then rinse and towel dry. If additional blending is necessary lightly buff with a gray (7448) Scotch-Brite™ pad then rinse and towel dry.
Semi-Gloss (blending):
Apply a mild abrasive cleaner such as Soft Scrub® and a damp sponge, buff in a circular motion. Rinse and lightly buff with a gray (7448) Scotch-Brite™ pad. Rinse again then follow with a white Scotch-Brite™ lightly buff in a circular motion. Rinse and towel dry.
Gloss Finish:
Specialized tooling is normally required to achieve and maintain a gloss finish. Please contact your fabricator for assistance. Service charge may apply.
Should there be a variation with the surface finish, proceed with the blending step over the entire surface. For a final touch, you may apply Protect All Shine Plus™ to your countertop for a clean, dry professional appearance.


Simple Precautions for your  Solid Surface Countertops:
Although  Solid Surface can be renewed or repaired if necessary by a professional fabricator, it’s best to try and avoid serious damage by following these few simple guidelines.
Preventing Heat Damage:
Although  Solid Surface is heat resistant, common sense should be applied concerning exposure to direct heat. As with all types of countertops use solid trivets with rubber tip feet or flame resistant heat mats when placing hot objects, heat producing appliances such as electric skillets, crock pots, etc. on the countertop.
Protecting the Surface:
Avoid exposing the surface to harsh chemicals such as paint removers/thinners, acetone based cleaners, stove/drain cleaners, etc. If these come in contact with the surface, quickly wash off with water, using the appropriate safety measures to avoid injury.
Do not cut directly on the surface of your countertop, always use a cutting board. While minor cuts and scratches can be repaired by the consumer, deeper cuts may require service of a professional at an added expense.

Do not stand or sit on the countertop

Address

4073 New Court Ave                     
Syracuse, NY 13206                    


Contacts

Email: sales@cnytops.com
Phone: 315-433-1038                    
Fax: 315-433-1338

Hours

M-F   8:30 AM - 5PM
Sat    10AM - 1 PM 
Sun   Closed

LInks

Corian Solid Surfaces
Livingstone Surfaces
LG Hi-Macs
WIlsonart